TYC
More Information for TYC 150353
{Alternate Inventory Numbers: 150353:8}
Continue Shopping
 
TYC 150353  
$52.79
Price
 $0.00
Core
 + Sold in packs of 1x1
Pack
 $52.79
Total
Add to Cart
[Wholesaler Closeout - Private Label Pkg. - 30 Day Warranty]
TYC 150353close
<
>
Part image
The float arm (where pictured) may ship detached to prevent damage in transit. To connect, simply snap the wire end into the sender hole.
TYC 150353 Specifications
Connector Pins Qty On Main Connector4 Pins
Fuel Level Sensor Resitance Range307-57
Fuel Tube Connection TypeQuick Connect
GPH (Gallons Per Hour Flow)37-45
Maximum Air Pressure116-174
Strainer IncludedYes
TYC's Commitment to Quality
  • Design: All TYC products are meticulously designed using the most advanced simulation software and tooling development technology.
  • Processes: The latest technologies are used in the creation of all TYC products.
  • Vehicle Test Fit: Prototypes are created and mounted onto a vehicle. Any adjustment needed is made prior to market release to ensure drop-in, hassle-free installation.
  • Accelerated Fatigue Test: An array of tests is conducted to assure top-notch quality products. Fatigue tests, such as abrasion, humidity, rain, salt spray, and vibration are applied to meet or exceed DOT/SAE and industry standards.
Product Features:
  • Pump design improves the flow rate over the original to ensure sufficient fuel overcomes the resistance that may be present in older vehicles' fuel delivery tubes.
  • Full individual testing for functionality before leaving the factory
  • Exhaustive testing that includes SAE 1537 compliance, which considers durability, noise, and simulated contaminated fuel with granules.
Benefits of Purchasing a Fuel Pump & Housing Assembly

Purchasing just the fuel pump is less expensive up-front, but a complete Fuel Pump & Housing Assembly provides added benefits:

  • Extend Service Life: New strainer(s), hoses, sensors and other components help resolve problems that could be caused by more than just the pump.
  • Reduce Install Time: Since you don't have to disassemble the housing, which could lead to damage, replacement becomes a simple swap, dramatically reducing installation time.
  • Save Money: The cost of the assembly is often cheaper than buying the components individually, and means you only have to do the job once.
Prevent Premature Fuel Pump Failure

Preventing premature fuel pump failure is far less expensive and time consuming than continuing to replace the pump. There are three common causes for premature fuel pump failure:

ELECTRICAL ISSUES
Poor electrical connections will mimic symptoms of a failed pump, sometimes resulting in unnecessary replacement. Before replacing the pump:
  • Use a Fuel System Tester to test pump pressure is within expected range
  • Use an Electrical Tester to test for bad wiring, burnt or corroded connectors
  • Check / Replace faulty Fuse(s) and Relay

BEFORE REPLACEMENT
FUEL CONTAMINATION
Dirt, rust or debris in the fuel can clog strainers and stick to internal pump components. When replacing the pump:
  • Replace Fuel Filter or Fuel Strainer
  • Empty and clean the tank with Fuel Tank Cleaner
  • Fill tank with fresh, uncontaminated fuel of appropriate grade

DURING REPLACEMENT
PUMP DAMAGE / OVERHEATING
Running low on gas causes your fuel to heat up quicker, and your pump to work harder. After replacing the pump:
  • Maintain at least 1/4 tank of fuel and use a Fuel Additive / Conditioner to keep pump cool and lubricated
  • If vehicle is stored without use, drain tank to prevent pump corrosion from fuel oxidation

AFTER REPLACEMENT
OEM / Interchange Numbers: 8E0919051CN

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

TYC Regular Inventory Warranty Information:
Limited Lifetime for non-commercial use
Warranty Details