|
DELPHI TA5193
|
|
$42.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$42.79
Total
|
|
|
|
|
|
| DELPHI TA5193 Specifications |
|---|
| Adjustable | No | | Bearing Material | Plastic | | Color | Black | | Cone Outside Diameter (MM) | 18.3 | | Dust Boot | Yes | | Dust Boot Material | Choloroprene Rubber (CR) | | End 1 Gender | Male | | End 1 Thread Diameter (IN) | 0.551 | | End 1 Thread Diameter (MM) | 14.0 | | End 2 Gender | Male | | End 2 Thread Diameter (IN) | 1.0 | | End 2 Thread Diameter (MM) | 25.4 | | End 2 Thread Direction | Counterclockwise (Left) | | End 2 Threads Per Inch | 18 | | Finish | Coated | | Greasable | Yes | | Grease Fitting Included | Yes | | Height (MM) | 101.0 | | Housing Material | High Strength Steel | | Length (MM) | 964.0 | | Length Stud Center to End (IN) | 37.008 | | Length Stud Center to End (mm) | 940.0 | | Mounting Hardware Included | Yes | | Position(s) | Right Inner | | Pre Greased | Yes | | Stud Type | Threaded | | Tie Rod Material | Steel | | Tube Diameter (in) | 1.181 | | Tube Diameter (mm) | 30.0 | | Type | BENT | | Weight (lb) | 11.9 | | Width (MM) | 73.0 |
|
|
Features:- Extensive dimensional and material analysis to ensure the very best compatibility to the Original Equipment (OE) part
- Tested alongside the OE part for 250,000 cycles to check braking force, cornering force and suspension travel movement, to ensure the part performs like the OE
- Able to withstand temperatures below -40ºC and over 120ºC, helping to ensure they perform even under the harshest conditions
- Parts exposed to 720 hours of salt spray for optimum protection against corrosion
- Additional cataphoretic coating for greater protection against corrosion and enhanced aesthetics
Attention California Customers - WARNING: This product can expose you to chemicals including Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
|
| OEM / Interchange Numbers: E8UZ3304B |
Warranty Information:Limited Lifetime |
|
