Tubing is coated and couplings and fittings are zinc-chromate plated for rust and corrosion resistance. They are highly resistant to oil, heat and ozone, to prevent premature failure
Double plies of high-tensile strength braided fabric help to withstand pulsation pressures up to 1,500 psi and bursting pressures up to 8,900 psi
Installation Tips
Replace all power steering hoses at the same time, to prevent system contamination
Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
Attention California Customers - WARNING: This product can expose you to Lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Wash hands after handling. (26)
Installation Tips