Engineered with premium G3000/G11H18 iron castings for strength, stability, and durability
Original Equipment (OE) vane configuration to ensure proper and maximum heat dissipation
CNC-machined to the tightest tolerances
100% precision mill-balanced for smoother stopping and zero vibration at any speed
Non-directional finish to promote faster break-in and smoother stops
Designed to meet the same form, fit, and function as OEM rotors
Quality tested to ensure long-lasting performance
R1 Concepts Super Duty Series brake pads are heavy duty brake pads designed for only the toughest of vehicles. Because of this, they may be more expensive than other options - but they're the only safe option for those who are hauling heavy loads or off-roading. With an asbestos-free and copper-free formula, these pads are safe both for drivers and the environment. R1 Concepts Super Duty Series brake pads are designed to provide the absolute best performance while also limiting the amount of wear and tear on heavy duty vehicles doing super heavy duty things.
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).
R1 CONCEPTS Warranty Information:12 months/12,000 miles
Installation Tips
Videos
