Features & Benefits

• Designed, manufactured and tested in full accordance to requirements for OE products
• Perfect finish in every detail such as connections, threads, bolts, mountings and is an exact fit for the vehicle mounting points
• Optimized aluminum brazing processes significantly reduce surface impurities caused by residues of brazing pre-treatment agents
• Inlet and outlet connections covered by tight closures protecting against impurities and moist absorption during production and storage

Installation Tips

• Old Refrigerant must be removed from the system in accordance with local, state, and federal laws.
• Replace the A/C System O-Rings / Seals connected to the A/C Condenser to prevent a Refrigerant leak.
• If the new A/C Condenser does not have an integrated drier, replace the A/C Receiver Drier / Accumulator as well. After opening your A/C System, this part becomes saturated with moisture and needs to be replaced.
• After installing the new A/C Condenser, evacuate the system for at least 45 minutes to remove any moisture. Make sure it holds vacuum for at least 5 minutes. If it does not, you may have a leak in the system. Find the leaking component and repair or replace it.
• Recharge the system with the correct amount and type of Refrigerant as specified in your Owner's Manual.