|
CENTRIC 12166023
|
|
$90.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$90.79
Total
|
|
|
|
|
|
| CENTRIC 12166023 Specifications |
|---|
| ABS Sensor Ring Included | No | | Bolt Circle Diameter (IN) | 6.500 | | Bolt Circle Diameter (MM) | 165.100 | | Bolt Thread Pitch (IN) | 18.000 | | Disc Mounting | Hub & Rotor | | Discard Thickness (IN) | 1.465 | | Discard Thickness (MM) | 37.210 | | Misc Holes | 0 | | Nominal Thickness (IN) | 1.531 | | Nominal Thickness (MM) | 38.900 | | Outside Diameter (IN) | 12.500 | | Outside Diameter (MM) | 317.500 | | Overall Height (IN) | 8.197 | | Overall Height (MM) | 208.200 | | Solid Or Vented Type Rotor | Vented | | Stud Thread Diameter (IN) | 0.563 | | Surface Type | Smooth | | Vane Style | Straight |
|
|
Centric C-Tek brake rotors provide exceptional quality and value.
Features & Benefits:
- Optimal surface finish for consistent stopping power from the first stop
- OE vane design and plate thickness for heat capacity and strength
- Low initial lateral run-out and disc thickness variation for smooth, vibration free stopping
- Precision balanced for vibration free performance
- G11H18 metallurgy
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - https://www.p65warnings.ca.gov/
Attention California Customers - WARNING: Cancer and Reproductive Harm
|
CENTRIC Warranty Information:90 days/3,000 miles |
|
