|
FRAM TG10575
|
|
$6.28
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$6.28
Total
|
|
|
|
|
|
| FRAM TG10575 Specifications |
|---|
| Anti-Drain Back Valve | Yes | | Attachment Type | Spin-on | | Burst Pressure | 310.000 | | Bypass Relief Valve | Yes | | Bypass Relief Valve Setting | 16-28 | | Filter Media Material | Cellulose/Synthetic Blend | | Filter Type | Spin-On Canister | | Gasket Inside Diameter (IN) | 2.467 | | Gasket Outside Diameter (IN) | 2.620 | | Gasket Thickness (IN) | 0.186 | | Gasket Type | Base | | Height (IN) | 4.060 | | Housing Color | Silver | | Inlet Type | Threaded | | Inside Thread Diameter | M22X1.5 | | Non Slip Grip | Yes | | Outside Diameter (IN) | 2.984 | | Replaceable Filter | Yes | | Reusable | No | | Thread Size | Metric | | Torque Nut | No |
|
|
With 15,000 miles of protection, Tough Guard is the ideal filter for drivers who have high mileage vehicles or push their vehicles in stop-and-go traffic, towing and extreme weather conditions. FRAM's re-engineered Synthetic-Blend filter media provides premium engine protection for your vehicle.
Features & Benefits:
 -
SureGrip: Provides non slip surface for easier installation and removal.
-
Precision Relief Valve: Coil spring with glass-fiber-reinforced nylon poppet.
-
Media: Stronger, more durable media provides an outstanding 99% dirt-trapping efficiency. Synthetic fiber/cellulose blend increases dirt-trapping and dirt-holding capacity for higher levels of engine protection and longer filter life. Microscopic synthetic fibers create small windows that trap dirt particles without affecting oil flow.
-
Anti-Drainback Valve: Silicone anti-drainback valve delivers superior start-up engine protection with up to 3X the hot oil resistance.
-
Gasket: Internally lubricated sealing gasket for easier filter removal.
 Which Oil Filter Is Right For You?
| Driving Style |
| Filter Type |
Oil Change Intervals |
Normal City / Highway |
Heavy Traffic |
Dirty / Dusty Conditions |
Extreme Weather |
Towing |
Economy
|
3,000 - 5,000 Miles |
★ |
|
|
|
|
Standard Replacement
|
OEM Recommended |
★ |
★ |
★ |
|
|
High Performance / Heavy Duty
|
OEM Recommended |
★ |
★ |
★ |
★ |
★ |
 Oil Change Toolbox
Installation Instructions - Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
- Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
- Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
- Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket.
- Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
|
| OEM / Interchange Numbers: 100255, 12690385, 12707246, 19330000, 5184231AA, 89017524, 89017525, AA5Z6714A, BU2Z6731A, ZZC423802 |
FRAM Warranty Information:Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 MonthsWarranty Details |
|
