|
NISSENS 72029
|
|
$58.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$58.79
Total
|
|
|
|
|
|
| NISSENS 72029 Specifications |
|---|
| Construction | Brazed cooling fins | | Core Height | 7.0900 IN | | Core Length | 8.4300 IN | | Core Material | Aluminum | | Core Width | 0.9800 IN | | Pipe Included | Yes | | Tank Material | Aluminum |
|
|
The heater gets its heat from the hot water circulating in the engine cooling system and releases it to the car cabin against which it is placed. Nissens' heaters are made according to their strict quality demands. They ensure that the product fits into the mounting casette and that the proper connections and extra foam rubber are included for installation. A control test of Nissens' heaters will ensure a long service life and that no odor problems arise due to oil residue or similar.
Service Tip: If you are experiencing unexplained or reoccurring heater core leaks, or notice dark spots on your failed heater core, test your coolant for Electrolysis. If detected, correct the source of the problem before replacing your failed heater core to prevent repeat failure.
 Cooling System Maintenance | Tips & Tools Premature Heater Core failure is often caused by poor Cooling System maintenance. Protect your engine and maximize system performance with simple preventative maintenance: - Completely drain and flush the system using Cooling System Flush. Flushing the system is critical to prevent system contamination and failure.
- Consider replacing the Heater Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. Rust and debris from degrading parts can clog the Heater Core and Radiator, and lead to costly engine damage.
- Refill Radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
|
| OEM / Interchange Numbers: 2118300361, A2118300361 |
Warranty Information:12 Months |
|
