POWER STOP
More Information for POWER STOP S2584
Continue Shopping
 
POWER STOP S2584  
($64.79/Each)
Price
$26.00
Core
+ Sold in packs of 2x2
Pack
$181.58
Total
POWER STOP S2584close
<
>
Part image
POWER STOP S2584 Specifications
Abutment Clips IncludedYes
Anti-Rattle Spring IncludedNo
Bleeder Screw IncludedYes
Bleeder Screw Thread Diameter (MM)10.0
Bleeder Screw Thread SizeM10 x 1.25
Caliper Casting MaterialCast Iron
Caliper ColorRed
Caliper FinishPowder Coated
Caliper Slides IncludedYes
Caliper TypeFloating
Inlet Fitting TypeBanjo
Inlet Thread Diameter (MM)10.0
Inlet Thread Pitch (MM)1.0
Inlet Thread SizeM10 x 1.0
Installation Instructions IncludedNo
Mounting Bolt IncludedNo
Mounting Bracket IncludedYes
Mounting Hardware IncludedNo
Mounting Hole Diameter (MM)12.0
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston Diameter (mm)57.10
Piston MaterialSteel
Piston Quantity1
Red Powder Coated; Reman; Includes Bracket
Don’t blend into the crowd – add some spice to your brake system with the vivid red electrostatic powder coating of Power Stop Performance Brake Calipers. Each Caliper is custom designed to bolt right on your vehicle and is pressure tested to protect against leaks. The high-temp EPDM rubber seals and boots add enhanced longevity. Power Stop Red Powder Coated Calipers come with fresh bleeder screws, stainless steel hardware clips and pins for a complete and easy installation of your new performance and visual upgrade.

Features & Benefits:
  • Electrostatic high-heat powder coating helps to resist corrosion and extends the life of the calipers while giving your vehicle a performance look
  • All calipers are 100% pressure tested and thoroughly inspected for quality and safety
  • Includes all new bleeder screws, hardware & pins
  • High temperature EPDM rubber for extended life
  • Premium Silicone lubrication provides smoother operation
Installation Tips
  • Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
  • Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
  • Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
  • Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
  • After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
  • After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Videos

Tech Tips: Helpful Tips For Installing A New Caliper

Tech Tips: How To Apply Brake Lube


Attention California Customers - WARNING: This product can expose you to chemicals including Lead, Chromium (Hexavalent compounds), Nickel and Cobalt, which are known to the State of California to cause cancer, and Arsenic and Chromium (Hexavalent compounds) which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.


Warranty Information:
90 Days / 3,000 Miles
Warranty Details