|
VDO / CONTINENTAL 408238420001Z
|
|
$188.89
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$188.89
Total
|
|
|
(Only 1 Remaining)
|
|
|
| VDO / CONTINENTAL 408238420001Z Specifications |
|---|
| Housing Material | Aluminum | | Idle Air Control Motor Included | Yes | | Throttle Position Sensor Included | Yes | | Gasket or Seal Included | No | | Mounting Hardware Included | No | | Voltage | 12 | | Color | Silver Matte | | Throttle Body Type | Electric | | Throttle Bore Shape | Circle | | Terminal Type | Blade | | Terminal Quantity | 6 | | Terminal Gender | Male | | Air Intake Port Maximum Diameter (MM) | 77.28 | | Connector Shape | Oval |
|
|
Formerly available as "OEM only" from the dealer, VDO now offers their line of original equipment electronic throttle bodies and air control valves to the aftermarket. With VDO OEM Direct Parts, every part number is the exact OEM product, which helps avoid comebacks and ensures the highest quality, ease of installation, fit, form, performance and long service life.
VDO Electronic Throttle Valves and Air Control Valves are built in ISO/TS certified facilities and are the exact OEM replacement part. They offer OE quality, dependable performance and competitive pricing, and they are available through most major parts suppliers. Don't question the part you are installing. Choose VDO OEM Direct Parts.
Features:
- Original equipment parts for simplified installation and fewer comebacks
- Vehicle-specific fit and function
- Made in ISO certified facilities
Experiencing Acceleration or Idling Issues? It Might Not be the Throttle Body!
Poor acceleration, hesitation and other idling issues can be caused by failure of a variety of parts. Use the chart below to help determine which part is causing the problem.
| Part | System | Other Symptoms |
|---|
| Throttle Body | Fuel & Air | |
| Mass Air Flow Sensor | Exhaust & Emission | - Difficulty Starting or Turning Engine
|
| Air Filter | Fuel & Air | - Dark Filter Media
- Debris in Filter or Filter Box (Change every year!)
|
| Fuel Injector | Fuel & Air | |
| Vacuum Hose / Connector | Hoses / Lines & Clamps | - Hissing, Squealing or Sucking Sound from Cracked Connector or Hose (Use a Vacuum Tester)
|
|
Spark Plug or Spark Plug Wire or Ignition Coil
| Ignition | - Increase in Exhaust Emissions
- Visible Wire Damage
- Oil Leak
|
| Accelerator Pedal Position Sensor | Interior | - Limp Mode
- No / Delayed Pedal Response
|
 Installation Tips - Perform OEM Recommended idle relearn procedure. Some applications may require the use of an OBD Scan Tool while others may refer to the Owners Manual.
- A relearn of idle values can be forced by disconnecting the negative battery cable for several minutes in order to clear the electronic control module's memory.
- Several minutes of idling and highway driving may be necessary to relearn idle values. Electrical loads such as headlights, AC, radio, etc. should be turned off while relearning.
- Erratic idle or engine surging after installation of replacement unit may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM - perform relearn again if a drivability condition is present.
- Clean intake manifold mounting surface and replace Intake Manifold Gasket, if necessary.
- Inspect Air Cleaner Intake Hose for cracks and proper sealing - replace or repair with Multi-Purpose Sealant, if necessary.
- Check harness for broken wires and wiggle connector to try and reproduce the problem. Replace or clean Connector, if necessary.
- Clear all diagnostic trouble codes from vehicle computer prior to idle relearn.
|
| OEM / Interchange Numbers: 13547516946 |
VDO / CONTINENTAL Warranty Information:12 Months |
|
