Re-engineered by Dorman with a solid forged design that eliminates the possibility of the ends breaking due to corrosion, Dorman's Suspension Stabilizer Bar offers top- notch durability. It's also a great value. More like a complete kit than a single part, all bushings, brackets and mounting hardware are included for a complete repair.

• Direct replacement for a proper fit every time
• Dorman-improved with high quality materials and a strong finish to resist corrosion in center or at ends of bar
• Comes with end links and polyurethane bushings (where applicable)
• A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards

How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.