This suspension stabilizer bar bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

• Direct replacement - fits and performs like the original equipment on specific vehicles
• Reliable fit - precision-engineered to match the design and dimensions of original components
• Durable construction - manufactured to strict standards using sturdy, safe materials
• Rigorously tested - thorough quality control measures ensure longevity

How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.