Provides a safe, heat and oil resistant connecting line between oil cooler and transmission.

• One fiber braid reinforcement over an oil resistant NBR rubber tube.
• Oil and abrasion resistant black neoprene cover.
• Meets or exceeds SAE J1019 requirements.
• Easy-to-follow instructions in each package.
• Handy hose diameter indicator on package.
• Maximum temperature rating: +275°F (+135°C) constant; +300°F (+150°C) intermittent

Tips & Tools For The Repair

• Replace all Transmission Cooler Lines at the same time to prevent system contamination
• Apply Penetrating Oil to corroded or stuck cooler line fittings to help break them loose
• Disconnect the cooler lines using a Flare Nut Wrench and drain the transmission fluid into a Drain Pan
• Consider installing an In-Line Transmission Filter on the return line to prevent system contamination and extend the life of the transmission
• Measure the amount of old transmission fluid drained to determine how much new Transmission Fluid to add
• Use a Funnel to prevent spills when refilling the transmission