|
TRW HB1803
|
|
$1.86
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$1.86
Total
|
|
[ Wholesaler Closeout - Private Label Pkg. - 30 Day Warranty] (Only 1 Remaining) |
|
|
|
|
|
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
 How To Determine Stabilizer (Sway) Bar Diameter To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
|
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).TRW Regular Inventory Warranty Information:Strut Mounts, Self-Leveling Hydro-Pneumatic shock absorbers and Nivomat shock absorbers are warranted against defects in material and workmanship and wear-out for two (2) years from the purchase date, if the vehicle has been operated under normal conditions and is still owned by the original purchaser of the product. |
|
