All EXEDY Hyper Multi-Plate clutches come with a lightweight, chromoly steel flywheel and the famous purple anodized forged aluminum clutch cover. All have T5001 cerametallic friction materials for extreme heat resistance. Surprisingly, even with it’s additional power capability, most multi-plate clutches exhibit light pedal pressure thanks to a half-engaged “zone” provided by the patented clutch “cushion” function.

• Increased torque holding capacity without sacrificing drivability
• Features stamped aluminum cover for increased stiffness, reduced weight (up to 50%), and higher level ratio for softer pedal effort versus stamped steel
• Both strap and lug drive models versions available (depending on the application)

Tips & Tools For The Job

• Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
• Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
• Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
• Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
• Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.

Videos

Additional Resources