TRAKMOTIVE TO8024XTT
|
|
$158.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$158.79
Total
|
|
|
|
TRAKMOTIVE TO8024XTT Specifications |
---|
ABS Ring Tooth Count | 0 | Abs Tone Ring Included | No | Axle Bolt Hex Size (MM) | 13 | Axle Bolt Length (MM) | 45.3 | Axle Bolt Thread Size | M8x1.25 | Axle Nut Included | No | Boot Material | CR | Inboard Joint Type | Flange | Inboard Shaft Connection Style | Bolt-on | Number of Bolt Holes | 1 | Number Of Inboard Joint Bolt Holes | 6 | Number Of Inboard Shaft Bolts | 0 | Number Of Inboard Splines | 0 | Number Of Outboard Joint Bolt Holes | 0 | Number Of Outboard Shaft Bolts | 1 | Number of Outboard Splines | 26 | Outboard Joint Type | Bolt-on | Outboard Shaft Connection Style | Spline | Overall Compressed Length (IN) | 20.75 | Overall Compressed Length (MM) | 527 |
|
|
Extended Travel; Extreme Articulation For Lifted Suspensions |
THE PROBLEM: A lifted vehicle dramatically increases stress on stock components and often exceeds the original design limitations.
THE SOLUTION: TrakMotive Extended Travel CV Axles are designed with a sliding center bar that provides up to 40mm more travel than an OEM CV shaft. Additionally, the CV joints can achieve up to a 47° articulation angle compared to a maximum 23° articulation angle on an OE CV joint. Extended Travel Axles will work with any lift kit that uses the stock axle.
Other Features & Benefits:
- Premium Thermoplastic Elastomer (TPE) boots are stronger and more resistant to off-road damage
- Assembled with the correct ABS Tone Ring*
- Heat-Treated & Precision-Machined Solid Steel Center Shafts
- Heat-Treated Machine-Ground Cages, Races & Bearings
- Includes all necessary attaching hardware and grease*
- Includes new dust rings & guards*
*Where Required
Installation Tip: If the part comes with an ABS Ring, but your vehicle does not have ABS, you may leave the ring in place if it does not interfere with installation.
Additional Resources Installation Tips
Top 5 Noise Symptoms Associated w/ Worn CV Shafts
|
|