| K SOURCE 90196 Specifications |
|---|
| Mirror Glass | Convex | | Heated | No | | Signal | No | | Dimming | No |
|
|
| Without Backing Plate; Convex |
Features & Benefits:- The most economical way to replace cracked mirror glass
- Mounting tape included for low-hassle, stick-on installation
- Will not restore heat, dimming or other glass functions but can fit mirrors with Manual, Heated Power and Power functions
Installation Instructions:
When old glass is cracked or discolored, but still in one piece:
- Clean old glass with alcohol before applying mounting tape to it.
- Position new glass carefully and apply directly over the old mirror.
When old glass has broken or missing pieces:
- Carefully remove all broken pieces from mirror housing. Use hammer to tap out glass and/or razor to scrape off dried adhesive if necessary. Caution: Always use safety goggles and gloves.
- Apply mounting tape to mirror housing and press new glass into place.
When mirror housing consists of two halves assembled with screws:
- Remove screws and take mirror housing apart. Slide out glass and rubber gasket.
- Put rubber gasket around new glass and replace into mirror housing.
- Replace and tighten screws.
When mirror housing is clamped over glass with a rubber gasket:
- Mark gasket with pen to indicate proper position for when you reinstall.
- Use hammer if necessary to tap out old glass and remove along with gasket. Caution: Always use safety goggle and gloves.
- Put rubber gasket around new glass and replace into mirror housing. Work rubber carefully into housing with wide flat screwdriver or similar tool. Lubricate with silicone or soapy water if necessary.
|
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information:90 Days |
|
