Features & Benefits:

• 100% pressure tested to ensure consistent, reliable performance
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance
• Mounting bracket included for hassle-free installation
• New banjo bolts are included where applicable to ensure a prefect fit and quick installation
• New bleeder screws provide trouble-free bleeding and a positive seal
• New washers included where applicable for a proper seal
• A plastic cap plug protects every brake port thread
• New stainless steel hardware clips and new mounting pins are included where applicable

Installation Tips

• Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
• Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
• Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
• Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
• After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
• After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid

Additional Resources