Pure Energy Premium starters are remanufactured to exacting OE specifications or better for maximum performance. They undergo rigorous manufacturing and testing processes to deliver unsurpassed reliability with every turn of the key. Their processes incorporate Durability Testing, Root Cause Analysis and Lean Manufacturing principles - all done in ISO/TS 16949 certified manufacturing facilities.

1. Solenoid contacts are subject to wear and arcing erosion, reducing conductivity and service life. Pure Energy solenoid contacts are 100% new to ensure clean, consistent contact and high conductivity for strong cranking every time.
2. Worn brushes are the #1 cause of starter failures. Pure Energy brushes are 100% new, quality and durability tested for unmatched performance and reliability.
3. Armatures and commutators are precision machined and electronically tested for consistent starting performance.
4. Starter drive clutches are fully dismantled, remanufactured, then sealed with aerospace quality grease to ensure maximum performance and durability.
5. Starters use 100% new bronze-sintered bushings for maximum performance and wear resistance.

Starter Troubleshooting Guide

• Ensure the Battery is fully charged (12.6 volts) and is the correct size for the vehicle
• Use a Battery Tester to test the condition of your battery

• Clean terminals with a Battery Cleaner and Battery Terminal Cleaner Tool
• Make sure all connections are tight and replace frayed / corroded Battery Cables

• Check Ignition Switch and wiring from switch to solenoid
• Check Neutral Safety Switch

• Check Flywheel and pinion for damage or wear
• Check Starter Motor Shims and Starter Bolts for proper alignment and torque