Highly effective detergent additives in this Engine Flush cleans the interior of the engine before an oil change.
Features:
Removes deposits, residues from all 4 stroke gasoline and diesel engines
Dissolves sludge and lacquer and isolates solid particle and liquid contaminants
Improves the combustion process and restores full engine performance
Recovers oil lubricating properties
Suitable for diesel particulate filters
Tested safe for turbochargers and catalytic converters
Simple to use, highly economical
Does not attack common sealing materials
Application:
One 500 ml can is sufficient for up to 5 liters (1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. Pro-Line Engine Flush is compatible with all commercially available engine oils. Minimum oil filling of 3 liters (0.8 gal.) is requested for optimum product performance. Note: Not suitable for use on motorbikes with wet clutches.
Videos
Introduction to Engine Flush
Attention California Customers - CR
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Videos