|
PERMATEX 81409
|
|
$16.44
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$16.44
Total
|
|
|
|
|
|
|
|
|
| High-Temp Red RTV Silicone Gasket Maker; 11oz. Cartridge |
OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent; resists auto and shop fluids.
Suggested Applications: Valve covers, oil pans, timing covers, and thermostat housings.
Directions for Use:
- For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake & Parts Cleaner
- Cut nozzle to desired bead size. Gaskets are best formed using a 1/16” to 1/4” bead
- Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn
- Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions
- Clean uncured silicone from hands, tools and clothing with Fast Orange® Hand Cleaner
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
|
|
