PETERSON MANUFACTURING
More Information for PETERSON MANUFACTURING 421491
{Alternate Inventory Numbers: 421-491}
Continue Shopping
 
PETERSON MANUFACTURING 421491  
$2.61
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$2.61
Total
PETERSON MANUFACTURING 421491close
Part image
PETERSON MANUFACTURING 421491 Specifications
Daisy ChainNo
Length (IN)10.5
Termination 2Stripped wire + Ring
TerminationPL3
Right angle plugs for single contact sealed incandescent stop/turn or backup alarms; 3-Wire, Rt. Angle, 10.5"

What are the advantages to LED versus incandescent lights?

Unlike traditional, incandescent lights that use bulbs, LED lamps do not use delicate wire filaments that stretch, weaken and eventually fail.

  • LED lamps last longer because they withstand road vibration and shock much more effectively than bulbs.
  • The life expectancy of an LED is 100,000 hours or six times that of an average incandescent bulb.
  • Besides the longevity, LED lamps consume significantly less power than incandescent lights. The amp draw of an LED can be as low as 1/10th that of an incandescent light. The lower amp draw means more power for other critical electrical needs.
  • LED units are also growing in popularity because of greater emphasis on safety issues.

When a vehicle’s brake lights are applied, LEDs respond instantaneously and provide a brighter, more focused illumination. Incandescent lights take about a quarter of a second to get to 90% full brightness.

A study by the University of Michigan’s Transportation Research Institute found that LED lamps respond on an average 2/10th of a second faster than standard incandescent lamps. Using test results at 65 mph, LEDs improved reaction time and decreased braking distance by 16 feet.


Attention California Customers - WARNING: Cancer and/or reproductive harm - www.P65Warnings.ca.gov


Attention California Customers - Y


Warranty Information:
12 Months
Warranty Details